Solar shades offer an affordable and easy way to keep your home cool during the summer months. However, before you can enjoy these benefits, it’s important to understand the basics of installing solar shades NYC. This blog will teach you how to measure the window size correctly, orient them correctly, and care for them so they last longer. With a little knowledge and a few simple steps, you’ll be ready to enjoy the benefits of solar shades!
The proper way to install solar shades
Installing solar shades is a great way to reduce energy costs and add a touch of luxury to your home. Follow these simple steps to get the job done right:
1. Make sure all cords are routed out of sight and away from drafts and heat sources.
2. Measure your windows and trim the shade material to fit.
3. Secure the cord ties at either end of the window with strong tape, so they don’t come loose in high winds or when heavy rains hit.
4. Drape the shade material over the top rail using a tension rod or pulley system for better stability/security against wind and weather damage during extreme temperatures outside (below 32 degrees F).
5. Finally, keyhole slots on each side allow you easy access if necessary for repairs or replacements throughout the life of your solar shades NYC!
How to Measure the Correct Window Size for Solar Shades
Adding solar shades to your window is a great way to reduce solar glare and heat and increase privacy. But before you make a purchase, be sure to have the correct window size in mind. This can be tricky, as most solar shades are designed for specific window sizes. To measure the correct size, use the manufacturer’s guidelines. Additionally, make sure to adjust the bracket as needed to ensure a perfect fit. Finally, before you purchase, be sure to measure the width and height of your window so you can be sure to get the right shade. Most solar shades are designed to fit a specific window size, so it’s important to have the right information before making a purchase.
How to Orient Solar Shades When Installing Them
Installing solar shades is a great way to reduce energy costs and protect your home from the sun’s rays. However, it’s important to orient them correctly so that the sun can’t shine in. Solar shades should be positioned so that the top of the shade is at least two-thirds of the way up the window frame. Additionally, make sure there is enough clearance between the window and the shade for ventilation. Test out your shades before installation by positioning them on a window that is lit up. Lastly, use brackets or screws to attach the shade instead of nails which will last longer and be less likely to rot or rust over time.
Maintenance and Cleaning of Solar Shades
Installing solar shades can be a great way to reduce energy costs and keep your home cooler in the summer. However, keeping them clean and free of debris is essential for their long-term success. This means cleaning them regularly using warm water and a mild soap solution. Don’t apply too much pressure when adjusting the shades, as this can damage them. Finally, apply a fresh coat of paint every 3-5 years to help prevent fading or yellowing. Thanks for reading!
Conclusion
Solar shades NYC are a great way to reduce energy costs and enjoy natural sunlight while keeping your home warm in winter. The installation process is straightforward and can be done by anyone with some basic DIY skills. Make sure to follow the proper installation steps and keep your solar shades clean and maintained to get the most out of them!
Urban Window Treatments 